Soft shell makes hard ceramic less likely to shatter

Rice lab shows complex, 3D-printed schwarzites withstand pressure when coated

Coating ceramic schwarzites, 3D-printed lattices, with a thin polymer helps keep them from shattering under pressure, according to Rice University materials scientists.

A thin shell of soft polymer can help keep knotty ceramic structures from shattering, according to materials scientists at Rice University.

Ceramics made with 3D printers crack under stress like any plate or bowl. But covered in a soft polymer cured under ultraviolet light, the same materials stand a far better chance of keeping their structural integrity, much like a car windshield’s treated glass is less likely to shatter.

The research at Rice’s Brown School of Engineering, which appears in Science Advances, demonstrates the concept on schwarzites, complex lattices that for decades existed only as theory but can now be made with 3D printers. With added polymers, they come to resemble structures found in nature like seashells and bones that consist of hardened platelets in a biopolymer matrix.

Schwarzites, named for German scientist Hermann Schwarz, who hypothesized in the 1880s the “negatively curved” structures could be used wherever very strong but lightweight materials are needed, from batteries to bones to buildings.

The researchers led by Rice materials scientists Pulickel Ajayan and Muhammad Rahman and graduate student and lead author Seyed Mohammad Sajadi proved through experiments and simulations that a coating of polymer no more than 100 microns thick will make fragile schwarzites up to 4.5 times more resistant to catastrophic fractures.

The structures may still crack under pressure, but they won’t fall apart.

“We’ve clearly seen that the uncoated structures are very brittle,” said Rahman, a research scientist at Rice. “But when we put the coated structures under compression, they will take the load until they completely break. And interestingly, even then they don’t completely break into pieces. They remain enclosed like laminated glass.”

The team, with members in Hungary, Canada and India, created computer models of the structures and printed them with a polymer-infused ceramic “ink.” The ceramic was cured on the fly by ultraviolet lights in the printer, and then dipped in polymer and cured again.

Along with uncoated control units, the intricate blocks were then subjected to high pressure. The control schwarzites shattered as expected, but the polymer coating prevented cracks from propagating in the others, allowing the structures to keep their form.

The researchers also compared the schwarzites to coated solid ceramics and found the porous structures were inherently tougher.

“The architecture definitely has a role,” Sajadi said. “We saw that if we coat a solid structure, the effect of the polymer was not as effective as with the schwarzite.”

Pulickel Ajayan
Pulickel Ajayan
Muhammad Rahman
Muhammad Rahman
Seyed Mohammad Sajadi
Seyed Mohammad Sajadi

Ajayan said the coatings acted a bit like the natural materials they mimic, as the polymer infuses defects in the ceramics and enhances their resistance.

Rahman said several structural applications could benefit from polymer-enhanced ceramics. Their biocompatibility could also eventually make them suitable for prosthetics.

“I’m pretty sure that if we can optimize these structures topologically, they also show good promise for use as bioscaffolds,” Rahman said.

Co-authors are Lívia Vásárhelyi, Ákos Kukovecz and Zoltán Kónya of the University of Szeged, Hungary; Reza Mousavi of ANSYS Inc.; Amir Hossein Rahmati of the University of Houston; Taib Arif and Tobin Filleter of the University of Toronto; Peter Boul of Aramco Americas; Zhenqian Pang and Teng Li of the University of Maryland; Rice alumnus Chandra Shekhar Tiwary of the Indian Institute of Technology Kharagpur, India; and research professor Robert Vajtai of Rice and the University of Szeged.

Ajayan is chair of Rice's Department of Materials Science and NanoEngineering, the Benjamin M. and Mary Greenwood Anderson Professor in Engineering and a professor of chemistry.

The research was supported by the Hungarian Research Development and Innovation Office, the Ministry for Innovation and Technology in Hungary and supercomputing resources at the University of Maryland and the Maryland Advanced Research Computing Center.

-30-

Read the abstract at https://advances.sciencemag.org/lookup/doi/10.1126/sciadv.abc5028.

Follow Rice News and Media Relations via Twitter @RiceUNews.

Related materials:

Math gets real in strong, lightweight structures: http://news.rice.edu/2017/11/16/math-gets-real-in-strong-lightweight-structures-2/

Theoretical tubulanes inspire ultrahard polymers: http://news.rice.edu/2019/11/13/theoretical-tubulanes-inspire-ultrahard-polymers-2/

Ajayan Research Group: https://ajayan.rice.edu

Department of Materials Science and NanoEngineering: https://msne.rice.edu

George R. Brown School of Engineering: https://engineering.rice.edu

VIDEO:

https://youtu.be/ZMPaXY5-C8M

Drop test. (Credit: Courtesy of the Ajayan Research Group/Rice University)

https://youtu.be/oWYyt_5pY44

Compression test. (Credit: Courtesy of the Ajayan Research Group/Rice University)

Image for download:

Uncoated Ceramic

https://news-network.rice.edu/news/files/2021/06/0628_CERAMIC-1-web.jpg

A compression test of 3D-printed schwarzites either coated or uncoated with a thin polymer shows how the polymer keeps the ceramic from shattering. The materials could be used wherever very strong but lightweight materials are needed. (Credit: Courtesy of the Ajayan Research Group/Rice University)

Seyed Mohammad Sajadi

https://news-network.rice.edu/news/files/2021/07/0628_CERAMIC-2-WEB-SAJADI.jpg

CAPTION: Seyed Mohammad Sajadi.

Muhammad Rahman

https://news-network.rice.edu/news/files/2021/07/0628_CERAMIC-3-web-Rahman.jpg

CAPTION: Muhammad Rahman. (Credit: Jeff Fitlow/Rice University)

Located on a 300-acre forested campus in Houston, Rice University is consistently ranked among the nation’s top 20 universities by U.S. News & World Report. Rice has highly respected schools of Architecture, Business, Continuing Studies, Engineering, Humanities, Music, Natural Sciences and Social Sciences and is home to the Baker Institute for Public Policy. With 3,978 undergraduates and 3,192 graduate students, Rice’s undergraduate student-to-faculty ratio is just under 6-to-1. Its residential college system builds close-knit communities and lifelong friendships, just one reason why Rice is ranked No. 1 for lots of race/class interaction and No. 1 for quality of life by the Princeton Review. Rice is also rated as a best value among private universities by Kiplinger’s Personal Finance.

Body